![Lw16](/uploads/s/56f913ba0eb743d7b874ec6b1bf845b8.webp)
Lw16
Basic Info.
Model NO. | LW16-40.5 |
Poles Number | 3 |
Type | Circuit Breaker |
Function | Conventional Circuit Breaker, Circuit-Breaker Failure Protection, Overcurrent Protection, OVP(Overvoltage Protection), RCCB |
Certification | ISO9001-2000, CE, CCC |
Rated Line Charging Close Current | 31.5A |
Rated Operation Sequence | O-0.3s-Co-180s-Co |
Rated Short Circuit Duration | 4s |
Mechanical Life | 6000 Times |
Quallity of Each Circuit Breaker | 1400kg |
Rated Sf6 Gas Pressure | 0.6MPa |
Rated Short Circuit Breaking Current | 31.5ka |
Rated Short Circuit Withstand Current | 20ka |
Rated Short Circuit Current | 50ka |
Rated Frequency | 50/60Hz |
Rated Currrent | 1600/2000/2500A |
Rated Voltage | 40.5kv |
Transport Package | Wooden Box Shipping |
Specification | 2750*680*1900mm |
Trademark | CNKC |
Origin | China |
Production Capacity | 1000PCS/Monthly |
Product Description
LW16-40.5 outdoor high-voltage SF6 circuit breaker is a three-phase AC 50 Hz outdoor high-voltage electrical equipment; it is suitable for the control and protection of 40.5 kV transmission and distribution system; it can also be used for connecting circuit breakers and switching capacitor banks; and it can be equipped with current transformer for measurement and protection. LW16-40.5 SF6 circuit breaker is equipped with CT14 spring operating mechanism. The circuit breaker meets the requirements of the national standard GB1984-1989 "AC High Voltage Circuit Breaker" and the International Electrotechnical Commission standard IEC60056:1987 "High Voltage AC Circuit Breaker".
1. Ambient air temperature: -5~+40 and the average temperature should not exceed +35 in 24h.2. Install and use indoors. Altitude above sea level for operation site should not exceed 2000M.3. Relative humidity should not exceed 50% at max temperature +40. Higher relative humidity is allowed at lower temperature. Ex. 90% at +20. But in view of the temperature change, it is possible that moderate dews will produce casually.4. Installation gradient not exceed 5.5. Install in the places without fierce vibration and shock and the sites insufficient to erode the electrical components.6. Any specific requirement, consult with manufactory.
A corner of the production workshop
Product packaging
Product application case